|
Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.
|
 Urethane 4-Way Dies |
| Four-way Dies are made of the hardest grade of Die-thane. These are designed to be used in a steel holder. |
 |
 |
 |
Four-way Dies are the most economical way of bending 90° bends in pre-polished or pre-coated metals. |
|
Acute-Angle Dies are used for bending the first hit of a hemming bend or for air bending any angle (up to 30° included angle) |
|
Hemming Die Pad is used for 2 hit single set-up hemming die. |
|
|
| |
|
URETHANE V-DIES |
STEEL HOLDER |
|
PART
NUMBER: |
V-Openings
(INCHES) |
BLOCK SIZE
(INCHES) |
W X H
(INCHES) |
PART NUMBER |
FW2538 |
1/4, 3/8
1/4, 3/8 |
1 X 1 |
2 X 2 |
SH1010 |
FW5050 |
1/2,1/2
1/2,1/2 |
1 X 1 |
2 X 2 |
SH1010 |
FW6210 |
5/8, 3/4
7/8, 1 |
2 X 2 |
3 X 3 |
SH3030 |
FW1120 |
1 1/8, 1 1/4
1 1/2, 2 |
3 X 3 |
4 X 4 |
SH404 |
FW6310 |
5/8, 3/4
7/8,1 |
1 1/2 X 1 1/2 |
2 1/2 X 2 |
SH1515 |
|
|
| |
|
|
